Your pool stays ready, even when you’re away.
Set your preferred water level once. The Staypoollizer 2.0 Quick Connect automatically replaces water lost through evaporation and splash-out, then stops filling when the selected level is restored.
How It Works
1. Connect the hose.
Attach the garden hose using the included Quick Connect fittings and turn on the water supply.
2. Set the water level.
Slide the black tank assembly to your preferred water height. No tools are required.
3. Let it work automatically.
When the pool level drops, Staypoollizer adds water until the selected level is restored, then shuts the water off.
Quick Connect Tip
Make sure the fittings are fully seated and securely engaged before use. Periodically inspect the washers and seals, and replace worn components as needed to maintain a proper connection.
Seasonal Care
Disconnect the hose and drain the unit before freezing conditions.
Automatic Pool Water Leveler for In-Ground Pools
Keeps your pool at the water level you set automatically, without permanent plumbing or constant manual refilling.
Staypoollizer 2.0 Quick Connect
Staypoollizer 2.0 Quick Connect
✓ Quick-connect garden-hose connection
✓ NXGEN Flow Control: 1–200 PSI
✓ No separate pressure regulator required
✓ No permanent plumbing required
Measure vertically from the top of the pool deck to your preferred water level.
The 4″–9″ Standard option fits most typical in-ground pool deck-to-water measurements.
Couldn't load pickup availability
✓ Free standard shipping within the continental U.S.
✓ Setup guidance and customer support available
Need help before or after purchase?
Prefer a traditional threaded hose connection? Choose the Brass Swivel model. Both in-ground models use the same NXGEN Flow Control system. View Staypoollizer 2.0 Brass Swivel
Your pool stays ready, even when you’re away.
Set your preferred water level once. The Staypoollizer 2.0 Quick Connect automatically replaces water lost through evaporation and splash-out, then stops filling when the selected level is restored.
How It Works
1. Connect the hose.
Attach the garden hose using the included Quick Connect fittings and turn on the water supply.
2. Set the water level.
Slide the black tank assembly to your preferred water height. No tools are required.
3. Let it work automatically.
When the pool level drops, Staypoollizer adds water until the selected level is restored, then shuts the water off.
Quick Connect Tip
Make sure the fittings are fully seated and securely engaged before use. Periodically inspect the washers and seals, and replace worn components as needed to maintain a proper connection.
Seasonal Care
Disconnect the hose and drain the unit before freezing conditions.
